Fiat 1800/2100

Fiat 1800/2100/1500L
1959 Fiat 2100 Berlina
Overview
Manufacturer	Fiat
Production	1959–1968
Designer	Dante Giacosa
Body and chassis
Class	Executive car
Body style	4-door saloon 5-door estate
Layout	Front-engine, rear-wheel-drive
Related	SEAT 1500
Powertrain
Engine	1800: 1.8 L I6 (petrol) 2100: 2.1 L I6 (petrol) 1500L: 1.5 L I4 (petrol)
Dimensions
Wheelbase	265 cm (104.3 in) 273 cm (107.5 in) (Speciale)
Length	446.5 cm (175.8 in) 475 cm (187.0 in) (Speciale) 462 cm (181.9 in) (Coupé)
Width	162 cm (63.8 in)
Height	147 cm (57.9 in) 138 cm (54.3 in) (Coupé)
Kerb weight	1,250 kg (2,760 lb)-1,350 kg (2,980 lb)
Chronology
Predecessor	Fiat 1900
Successor	Fiat 2300

The Fiat 1800 and 2100 are six-cylinder saloons produced by Italian automotive manufacturer Fiat between 1959 and 1968. Both six-cylinder models appeared in 1959: in 1963, a four-cylinder 1500 cc version was added to the range. The 1800/2100 were designed by Fiat's own Dante Giacosa.^[1]

Fiat 1800 (1959-68)

Fiat 1800

The Fiat 1800 appeared in 1959, offered as a 4-door sedan and a 5-door Familiare (Station Wagon ). The 1800 model had a 6-cylinder in-line engine with 1795 cc and a power output of 75 hp / 55 kW delivered through a 4-speed transmission. Its maximum speed was, depending on the version, 137 km/h (85 mph) - 142 km/h (88 mph). This was replaced in 1961 with the 1800 model B: the engine output was now 81 hp / 60 kW and top speed between 143 km/h (89 mph) - 146 km/h (91 mph).

Fiat 2100 (1959-61)

The 2100 was a version with a bigger 2054 cc six-cylinder engine. In autumn 1959, the 2100 Speciale was introduced with a lengthened wheelbase and different front grille. The Speciale was used by diplomats. The 2100 was discontinued in Italy during 1961, when the Fiat 2300 became available.

Fiat 1500L (1961-68)

Fiat 1500L

In 1963 Fiat used the body of Fiat 1800/2100 to create a new, less expensive model, the Fiat 1500L. To distinguish it from the 1300/1500 it used the designation 1500L (for 'Lunga, "long"). The car shared its more compact sibling's four-cylinder 1481 cc engine, delivering 72 bhp, which was increased to 75 bhp in 1964 for the second series. A reduced-performance version was also offered, aimed at taxi drivers. This proved popular in southern Europe, equipped with a version of the 1481 cc petrol inline-four engine developing just 60 bhp: the low power engine permitted the transport of customers in comfort and space at urban speeds, without consuming too much fuel.

This version was made also by SEAT in Spain, where no other petrol version of the Fiat 1800/2100 was ever produced. It was badged simply as SEAT 1500, since no equivalent of the Fiat 1500 was produced by SEAT. Nearly 200,000 Seat 1500s were built until 1972.

It is estimated that total production in Italy of the Fiat 1800/2100 range is 150,000.

Engines

Fiat 2100 Giardinietta, one of the rare estates

Model	Years	Engine	Displacement	Power	Fuel system
1800	1959-61	OHV inline-six	1795 cc	75 hp	single carburetor
1800B	1962-68	OHV inline-six	1795 cc	86 hp	single carburetor
2100	1959-61	OHV inline-six	2054 cc	82 hp	single carburetor
1500L	1963-64 1964-67	OHV inline-four	1481 cc	72 hp 75 hp	single carburetor

References

1. Felicioli, Riccardo P. (1999). Fiat 1899 - 1999. Italy: Automobilia, Bruno Alfieri. pp. 82–83. ISBN 88-7960-094-X.

• Fiat Personenwagen, by Fred Steiningen, 1994. ISBN 3-923448-37-6