Nanorobotics

"Nanobots" redirects here. For the They Might Be Giants album, see Nanobots (album).

Nanorobotics is the emerging technology field creating machines or robots whose components are at or close to the scale of a nanometre (10−9 meters).[1][2][3] More specifically, nanorobotics refers to the nanotechnology engineering discipline of designing and building nanorobots, with devices ranging in size from 0.1–10 micrometres and constructed of nanoscale or molecular components.[4][5] The names nanobots, nanoids, nanites, nanomachines, or nanomites have also been used to describe these devices currently under research and development.[6][7]

Nanomachines are largely in the research and development phase,[8] but some primitive molecular machines and nanomotors have been tested. An example is a sensor having a switch approximately 1.5 nanometers across, capable of counting specific molecules in a chemical sample. The first useful applications of nanomachines might be in nanomedicine. For example,[9] biological machines could be used to identify and destroy cancer cells.[10][11] Another potential application is the detection of toxic chemicals, and the measurement of their concentrations, in the environment. Rice University has demonstrated a single-molecule car developed by a chemical process and including buckyballs for wheels. It is actuated by controlling the environmental temperature and by positioning a scanning tunneling microscope tip.

Another definition is a robot that allows precision interactions with nanoscale objects, or can manipulate with nanoscale resolution. Such devices are more related to microscopy or scanning probe microscopy, instead of the description of nanorobots as molecular machine. Following the microscopy definition even a large apparatus such as an atomic force microscope can be considered a nanorobotic instrument when configured to perform nanomanipulation. For this perspective, macroscale robots or microrobots that can move with nanoscale precision can also be considered nanorobots.

Nanorobotics theory

According to Richard Feynman, it was his former graduate student and collaborator Albert Hibbs who originally suggested to him (circa 1959) the idea of a medical use for Feynman's theoretical micromachines (see nanotechnology). Hibbs suggested that certain repair machines might one day be reduced in size to the point that it would, in theory, be possible to (as Feynman put it) "swallow the doctor". The idea was incorporated into Feynman's 1959 essay There's Plenty of Room at the Bottom.[12]

Since nanorobots would be microscopic in size, it would probably be necessary for very large numbers of them to work together to perform microscopic and macroscopic tasks. These nanorobot swarms, both those incapable of replication (as in utility fog) and those capable of unconstrained replication in the natural environment (as in grey goo and its less common variants, such as synthetic biology or utility fog), are found in many science fiction stories, such as the Borg nanoprobes in Star Trek and The Outer Limits episode The New Breed.

Some proponents of nanorobotics, in reaction to the grey goo scenarios that they earlier helped to propagate, hold the view that nanorobots capable of replication outside of a restricted factory environment do not form a necessary part of a purported productive nanotechnology, and that the process of self-replication, if it were ever to be developed, could be made inherently safe. They further assert that their current plans for developing and using molecular manufacturing do not in fact include free-foraging replicators.[13][14]

The most detailed theoretical discussion of nanorobotics, including specific design issues such as sensing, power communication, navigation, manipulation, locomotion, and onboard computation, has been presented in the medical context of nanomedicine by Robert Freitas. Some of these discussions remain at the level of unbuildable generality and do not approach the level of detailed engineering.

Approaches

Biochip

Main article: Biochip

The joint use of nanoelectronics, photolithography, and new biomaterials provides a possible approach to manufacturing nanorobots for common medical applications, such as for surgical instrumentation, diagnosis and drug delivery.[15][16][17] This method for manufacturing on nanotechnology scale is currently in use in the electronics industry.[18] So, practical nanorobots should be integrated as nanoelectronics devices, which will allow tele-operation and advanced capabilities for medical instrumentation.[19][20]

Nubots

Main article: DNA machine

Nubot is an abbreviation for "nucleic acid robot." Nubots are organic molecular machines at the nanoscale.[21] DNA structure can provide means to assemble 2D and 3D nanomechanical devices. DNA based machines can be activated using small molecules, proteins and other molecules of DNA.[22][23][24] Biological circuit gates based on DNA materials have been engineered as molecular machines to allow in-vitro drug delivery for targeted health problems.[25] Such material based systems would work most closely to smart biomaterial drug system delivery,[26] while not allowing precise in vivo teleoperation of such engineered prototypes.

Surface-bound systems

A number of reports have demonstrated the attachment of synthetic molecular motors to surfaces.[27][28] These primitive nanomachines have been shown to undergo machine-like motions when confined to the surface of a macroscopic material. The surface anchored motors could potentially be used to move and position nanoscale materials on a surface in the manner of a conveyor belt.

Positional nanoassembly

Nanofactory Collaboration,[29] founded by Robert Freitas and Ralph Merkle in 2000 and involving 23 researchers from 10 organizations and 4 countries, focuses on developing a practical research agenda[30] specifically aimed at developing positionally-controlled diamond mechanosynthesis and a diamondoid nanofactory that would have the capability of building diamondoid medical nanorobots.

Bacteria-based

This approach proposes the use of biological microorganisms, like the bacterium Escherichia coli[31] and Salmonella typhimurium.[32] Thus the model uses a flagellum for propulsion purposes. Electromagnetic fields normally control the motion of this kind of biological integrated device.[33] Chemists at the University of Nebraska have created a humidity gauge by fusing a bacteria to a silicone computer chip.[34]

Virus-based

Retroviruses can be retrained to attach to cells and replace DNA. They go through a process called reverse transcription to deliver genetic packaging in a vector.[35] Usually, these devices are Pol – Gag genes of the virus for the Capsid and Delivery system. This process is called retroviral Gene Therapy, having the ability to re-engineer cellular DNA by usage of viral vectors.[36] This approach has appeared in the form of Retroviral, Adenoviral, and Lentiviral gene delivery systems.[37] These Gene Therapy vectors have been used in cats to send genes into the genetic modified animal "GMO" causing it display the trait. [38]

Open technology

A document with a proposal on nanobiotech development using open technology approaches has been addressed to the United Nations General Assembly.[39] According to the document sent to the UN, in the same way that Open Source has in recent years accelerated the development of computer systems, a similar approach should benefit the society at large and accelerate nanorobotics development. The use of nanobiotechnology should be established as a human heritage for the coming generations, and developed as an open technology based on ethical practices for peaceful purposes. Open technology is stated as a fundamental key for such an aim.

Nanorobot race

In the same ways that technology development had the space race and nuclear arms race, a race for nanorobots is occurring.[40][41][42][43][44] There is plenty of ground allowing nanorobots to be included among the emerging technologies.[45] Some of the reasons are that large corporations, such as General Electric, Hewlett-Packard, Synopsys, Northrop Grumman and Siemens have been recently working in the development and research of nanorobots;[46][47][48][49][50] surgeons are getting involved and starting to propose ways to apply nanorobots for common medical procedures;[51] universities and research institutes were granted funds by government agencies exceeding $2 billion towards research developing nanodevices for medicine;[52][53] bankers are also strategically investing with the intent to acquire beforehand rights and royalties on future nanorobots commercialisation.[54] Some aspects of nanorobot litigation and related issues linked to monopoly have already arisen.[55][56][57] A large number of patents has been granted recently on nanorobots, done mostly for patent agents, companies specialized solely on building patent portfolio, and lawyers. After a long series of patents and eventually litigations, see for example the Invention of Radio or about the War of Currents, emerging fields of technology tend to become a monopoly, which normally is dominated by large corporations.[58]

Manufacture

3D Printing

Main article: 3D printing

3D printing is the process by which a three-dimensional structure is built through the various processes of additive manufacturing. Nanoscale 3D printing involves many of the same process, incorporated at a much smaller scale. In order to print a structure in the 5-400 µm scale, the precision of the 3D printing machine is improved greatly.

3D Printing and Laser Etching

A technique pioneered in Seoul, South Korea utilizes a two-step process of 3D Printing, utilizing a 3D printing and laser etched plates.[59] In order to be more precise at a nanoscale,the 3D printing process utilizes a laser etching machine, which etches into each plate the details required for the segment of nanorobot. The plate is then transferred over to the 3D printer, which fills the etched regions with the desired nanoparticle. The 3D printing process is repeated until the nanorobot is built from the bottom up. This 3D printing process has many benefits. First, it increases the overall accuracy of the printing process. Second, it has the potential to create functional segments of a nanorobot.[59]

Two-Photon Lithography

Main article: Lithography

The 3D printer uses a liquid resin, which is hardened at precisely the correct spots by a focused laser beam. The focal point of the laser beam is guided through the resin by movable mirrors and leaves behind a hardened line of solid polymer, just a few hundred nanometers wide. This fine resolution enables the creation of intricately structured sculptures as tiny as a grain of sand. This process takes place by using photoactive resins, which are hardened by the laser at an extremely small scale to create the structure. This process is quick by nanoscale 3D printing standards. Ultra-small features can be made with the 3D micro-fabrication technique used in multiphoton photopolymerisation. This approach uses a focused laser to trace the desired 3D object into a block of gel. Due to the nonlinear nature of photo excitation, the gel is cured to a solid only in the places where the laser was focused while the remaining gel is then washed away. Feature sizes of under 100 nm are easily produced, as well as complex structures with moving and interlocked parts.[60]

Potential applications

Nanomedicine

Main article: Nanomedicine

Potential applications for nanorobotics in medicine include early diagnosis and targeted drug-delivery for cancer,[61][62][63] biomedical instrumentation,[64] surgery,[65][66] pharmacokinetics,[10] monitoring of diabetes,[67][68][69] and health care.

In such plans, future medical nanotechnology is expected to employ nanorobots injected into the patient to perform work at a cellular level. Such nanorobots intended for use in medicine should be non-replicating, as replication would needlessly increase device complexity, reduce reliability, and interfere with the medical mission.

Nanotechnology provides a wide range of new technologies for developing customized solutions that optimize the delivery of pharmaceutical products. Today, harmful side effects of treatments such as chemotherapy are commonly a result of drug delivery methods that don't pinpoint their intended target cells accurately.[70] Researchers at Harvard and MIT, however, have been able to attach special RNA strands, measuring nearly 10 nm in diameter, to nano-particles, filling them with a chemotherapy drug. These RNA strands are attracted to cancer cells. When the nanoparticle encounters a cancer cell, it adheres to it, and releases the drug into the cancer cell.[71] This directed method of drug delivery has great potential for treating cancer patients while avoiding negative effects (commonly associated with improper drug delivery).[70][72] The first demonstration of nanomotors operating in living organism was carried out in 2014 at University of California, San Diego.[73] MRI-guided nanocapsules are one potential precursor to nanorobots.[74]

Another useful application of nanorobots is assisting in the repair of tissue cells alongside white blood cells.[75] The recruitment of inflammatory cells or white blood cells (which include neutrophil granulocytes, lymphocytes, monocytes and mast cells) to the affected area is the first response of tissues to injury.[76] Because of their small size nanorobots could attach themselves to the surface of recruited white cells, to squeeze their way out through the walls of blood vessels and arrive at the injury site, where they can assist in the tissue repair process. Certain substances could possibly be utilized to accelerate the recovery.

The science behind this mechanism is quite complex. Passage of cells across the blood endothelium, a process known as transmigration, is a mechanism involving engagement of cell surface receptors to adhesion molecules, active force exertion and dilation of the vessel walls and physical deformation of the migrating cells. By attaching themselves to migrating inflammatory cells, the robots can in effect “hitch a ride” across the blood vessels, bypassing the need for a complex transmigration mechanism of their own.[75]

In the United States, FDA currently regulates nanotechnology on the basis of size.[77] The FDA also regulates that which acts by chemical means as a drug, and that which acts by physical means as a device.[78] Single molecules can also be used as Turing machines, like their larger paper tape counterparts, capable of universal computation and exerting physical (or chemical) forces as a result of that computation. Safety systems are being developed so that if a drug payload were to be accidentally released, the payload would either be inert or another drug would be then released to counteract the first. Toxicological testing becomes convolved with software validation in such circumstances. With new advances in nanotechnology these small devices are being created with the ability to self-regulate and be ‘smarter’ than previous generations. As nanotechnology becomes more complex, how will regulatory agencies distinguish a drug from a device?[78] Drug molecules must undergo slower and more expensive testing (for example, preclinical toxicological testing) than devices, and the regulatory pathways for devices are simpler than for drugs. Perhaps smartness, if smart enough, will someday be used to justify a device classification for a single molecule nanomachine. Devices are generally approved more quickly than drugs, so device classification could be beneficial to patients and manufacturers.

See also

References

  1. Vaughn JR (2006). "Over the Horizon: Potential Impact of Emerging Trends in Information and Communication Technology on Disability Policy and Practice". National Council on Disability, Washington DC: 1–55.
  2. Ghosh, A.; Fischer, P. (2009). "Controlled Propulsion of Artificial Magnetic Nanostructured Propellers". Nano Letters 9 (6): 2243–2245. Bibcode:2009NanoL...9.2243G. doi:10.1021/nl900186w. PMID 19413293.
  3. Sierra, D. P.; Weir, N. A.; Jones, J. F. (2005). "A review of research in the field of nanorobotics". U.S. Department of Energy – Office of Scientific and Technical Information Oak Ridge, TN. SAND2005-6808: 1–50. doi:10.2172/875622.
  4. Tarakanov, A. O.; Goncharova, L. B.; Tarakanov Y. A. (2009). "Carbon nanotubes towards medicinal biochips". Wiley Interdisciplinary Reviews: Nanomedicine and Nanobiotechnology 2 (1): 1–10. doi:10.1002/wnan.69.
  5. Ignatyev, M. B. (2010). "Necessary and sufficient conditions of nanorobot synthesis". Doklady Mathematics 82 (1): 671–675. doi:10.1134/S1064562410040435.
  6. Cerofolini, G.; Amato, P.; Asserini, M.; Mauri, G. (2010). "A Surveillance System for Early-Stage Diagnosis of Endogenous Diseases by Swarms of Nanobots". Advanced Science Letters 3 (4): 345–352. doi:10.1166/asl.2010.1138.
  7. Yarin, A. L. (2010). "Nanofibers, nanofluidics, nanoparticles and nanobots for drug and protein delivery systems". Scientia Pharmaceutica Central European Symposium on Pharmaceutical Technology 78 (3): 542. doi:10.3797/scipharm.cespt.8.L02.
  8. Wang, J. (2009). "Can Man-Made Nanomachines Compete with Nature Biomotors?". ACS Nano 3 (1): 4–9. doi:10.1021/nn800829k. PMID 19206241.
  9. Amrute-Nayak, M.; Diensthuber, R. P.; Steffen, W.; Kathmann, D.; Hartmann, F. K.; Fedorov, R.; Urbanke, C.; Manstein, D. J.; Brenner, B.; Tsiavaliaris, G. (2010). "Targeted Optimization of a Protein Nanomachine for Operation in Biohybrid Devices". Angewandte Chemie 122 (2): 322–326. doi:10.1002/ange.200905200.
  10. 1 2 Patel, G. M.; Patel, G. C.; Patel, R. B.; Patel, J. K.; Patel, M. (2006). "Nanorobot: A versatile tool in nanomedicine". Journal of Drug Targeting 14 (2): 63–67. doi:10.1080/10611860600612862. PMID 16608733.
  11. Balasubramanian, S.; Kagan, D.; Jack Hu, C. M.; Campuzano, S.; Lobo-Castañon, M. J.; Lim, N.; Kang, D. Y.; Zimmerman, M.; Zhang, L.; Wang, J. (2011). "Micromachine-Enabled Capture and Isolation of Cancer Cells in Complex Media". Angewandte Chemie International Edition 50 (18): 4161–4164. doi:10.1002/anie.201100115.
  12. Richard P. Feynman (December 1959). "There's Plenty of Room at the Bottom". Retrieved March 2010.
  13. Zyvex: "Self replication and nanotechnology" "artificial self replicating systems will only function in carefully controlled artificial environments ... While self replicating systems are the key to low cost, there is no need (and little desire) to have such systems function in the outside world. Instead, in an artificial and controlled environment they can manufacture simpler and more rugged systems that can then be transferred to their final destination. ... The resulting medical device will be simpler, smaller, more efficient and more precisely designed for the task at hand than a device designed to perform the same function and self replicate. ... A single device able to do [both] would be harder to design and less efficient."
  14. "Foresight Guidelines for Responsible Nanotechnology Development" "Autonomous self-replicating assemblers are not necessary to achieve significant manufacturing capabilities." "The simplest, most efficient, and safest approach to productive nanosystems is to make specialized nanoscale tools and put them together in factories big enough to make what is needed. ... The machines in this would work like the conveyor belts and assembly robots in a factory, doing similar jobs. If you pulled one of these machines out of the system, it would pose no risk, and be as inert as a light bulb pulled from its socket."
  15. Fisher, B. (2008). "Biological Research in the Evolution of Cancer Surgery: A Personal Perspective". Cancer Research 68 (24): 10007–10020. doi:10.1158/0008-5472.CAN-08-0186. PMID 19074862.
  16. Cavalcanti, A.; Shirinzadeh, B.; Zhang, M.; Kretly, L. C. (2008). "Nanorobot Hardware Architecture for Medical Defense". Sensors 8 (5): 2932–2958. doi:10.3390/s8052932.
  17. Hill, C.; Amodeo, A.; Joseph, J. V.; Patel, H. R. (2008). "Nano- and microrobotics: How far is the reality?". Expert Review of Anticancer Therapy 8 (12): 1891–1897. doi:10.1586/14737140.8.12.1891. PMID 19046109.
  18. Cale, T. S.; Lu, J. Q.; Gutmann, R. J. (2008). "Three-Dimensional Integration in Microelectronics: Motivation, Processing, and Thermomechanical Modeling". Chemical Engineering Communications 195 (8): 847–888. doi:10.1080/00986440801930302.
  19. Couvreur, P.; Vauthier, C. (2006). "Nanotechnology: Intelligent Design to Treat Complex Disease". Pharmaceutical Research 23 (7): 1417–1450. doi:10.1007/s11095-006-0284-8. PMID 16779701.
  20. Elder, J. B.; Hoh, D. J.; Oh, B. C.; Heller, A. C.; Liu, C. Y.; Apuzzo, M. L. J. (2008). "The Future of Cerebral Surgery". Neurosurgery 62: SHC1555. doi:10.1227/01.neu.0000333820.33143.0d. PMID 18695575.
  21. Wong, P. C.; Wong, K. K.; Foote, H. (2003). "Organic data memory using the DNA approach". Communications of the ACM 46: 95–98. doi:10.1145/602421.602426.
  22. Seeman. N. C. (2005). "From genes to machines: DNA nanomechanical devices". Trends in Biochemical Sciences 30 (3): 119–125. doi:10.1016/j.tibs.2005.01.007. PMC 3471994. PMID 15752983.
  23. Montemagno, C.; Bachand, G. (1999). "Constructing nanomechanical devices powered by biomolecular motors". Nanotechnology 10 (3): 225–231. Bibcode:1999Nanot..10..225M. doi:10.1088/0957-4484/10/3/301.
  24. Yin, P.; Choi, H. M. T.; Calvert, C. R.; Pierce, N. A. (2008). "Programming biomolecular self-assembly pathways". Nature 451 (7176): 318–322. doi:10.1038/nature06451. PMID 18202654.
  25. Douglas, Shawn M.; Bachelet, Ido; Church, George M. (17 February 2012). "A logic-gated nanorobot for targeted transport of molecular payloads". Science 335 (6070): 831–834. doi:10.1126/science.1214081.
  26. Jin, S.; Ye, K. (2007). "Nanoparticle-Mediated Drug Delivery and Gene Therapy". Biotechnology Progress 23 (1): 32–41. doi:10.1021/bp060348j. PMID 17269667.
  27. Carroll, G. T.; Pollard, M. M.; Van Delden, R.; Feringa, B. L. (2010). "Controlled rotary motion of light-driven molecular motors assembled on a gold film". Chemical Science 1: 97. doi:10.1039/C0SC00162G.
  28. Carroll, G. T.; London, G. B.; Landaluce, T. F. N.; Rudolf, P.; Feringa, B. L. (2011). "Adhesion of Photon-Driven Molecular Motors to Surfacesvia1,3-Dipolar Cycloadditions: Effect of Interfacial Interactions on Molecular Motion". ACS Nano 5: 622–630. doi:10.1021/nn102876j.
  29. "Nanofactory Collaboration". molecularassembler.com.
  30. "Nanofactory Technical Challenges". molecularassembler.com.
  31. Martel, S.; Mohammadi, M.; Felfoul, O.; Zhao Lu; Pouponneau, P. (2009). "Flagellated Magnetotactic Bacteria as Controlled MRI-trackable Propulsion and Steering Systems for Medical Nanorobots Operating in the Human Microvasculature". The International Journal of Robotics Research 28 (4): 571–582. doi:10.1177/0278364908100924. PMC 2772069. PMID 19890435.
  32. Park, S.; Park, S.; Cho, S.; Kim, D.; Lee, Y.; Ko, S.; Hong, Y.; Choy, H.; Min, J.; Park, J.; Park, S. (2013). "New paradigm for tumor theranostic methodology using bacteria-based microrobot". Scientific Reports 3. doi:10.1038/srep03394. PMID 24292152.
  33. Sakar, Mahmud (2010). "MicroBioRobots for Single Cell" (PDF).
  34. Berry, V.; Saraf, R. F. (2005). "Self-assembly of nanoparticles on live bacterium: An avenue to fabricate electronic devices". Angewandte Chemie International Edition 44 (41): 6668–6673. doi:10.1002/anie.200501711.
  35. RCSB Protein Data Bank. "RCSB PDB-101". rcsb.org.
  36. Perkel, Jeffrey M. Viral Mediated Gene Delivery. sciencemag.org
  37. Cepko, C.; Pear, W. (2001). "Overview of the Retrovirus Transduction System". Current Protocols in Molecular Biology. doi:10.1002/0471142727.mb0909s36. ISBN 0471142727.
  38. Jha, Alok (11 September 2011). "Glow cat: fluorescent green felines could help study of HIV". the Guardian.
  39. Cavalcanti, A. (2009). "Nanorobot Invention and Linux: The Open Technology Factor – An Open Letter to UNO General Secretary" (PDF). CANNXS Project 1 (1): 1–4.
  40. Huilgol, N.; Hede, S. (2006). ""Nano": The new nemesis of cancer". Journal of Cancer Research and Therapeutics 2 (4): 186–95. doi:10.4103/0973-1482.29829. PMID 17998702.
  41. Das, S.; Gates, A. J.; Abdu, H. A.; Rose, G. S.; Picconatto, C. A.; Ellenbogen, J. C. (2007). "Designs for Ultra-Tiny, Special-Purpose Nanoelectronic Circuits". IEEE Transactions on Circuits and Systems I: Regular Papers 54 (11): 2528–2540. doi:10.1109/TCSI.2007.907864.
  42. Solomon, N., Nanorobotics System, WIPO Patent WO/2008/063473, 2008.
  43. Kurzweil, R., Systems and Methods for Generating Biological Material, WIPO Patent WO/2007/001962, 2007.
  44. Rosso, F.; Barbarisi, M.; Barbarisi, A. (2011). Technology for Biotechnology. Biotechnology in Surgery. pp. 61–73. doi:10.1007/978-88-470-1658-3_4. ISBN 978-88-470-1657-6.
  45. Challacombe, B.; Althoefer, K.; Stoianovici, D. (2010). "Emerging Robotics". New Technologies in Urology 7: 49–56. doi:10.1007/978-1-84882-178-1_7. ISBN 978-1-84882-177-4.
  46. Murday, J. S.; Siegel, R. W.; Stein, J.; Wright, J. F. (2009). "Translational nanomedicine: Status assessment and opportunities". Nanomedicine: Nanotechnology, Biology and Medicine 5 (3): 251–273. doi:10.1016/j.nano.2009.06.001. PMID 19540359.
  47. Hogg, T. (2007). "Coordinating Microscopic Robots in Viscous Fluids". Autonomous Agents and Multi-Agent Systems 14 (3): 271–305. doi:10.1007/s10458-006-9004-3.
  48. Ispir, M., Oktem, L., Method and apparatus for using entropy in ant colony optimization circuit design from high level synthesis, US Patent US8296711 B2, 2010.
  49. Ball, H. H., Lucas, M. R., Goutzoulis, A. P. U.S. Patent 7,783,994 "Method for providing secure and trusted ASICs using 3D integration", 2010.
  50. Pfister, M. U.S. Patent 20,110,048,433 "Method for forming an interventional aid with the aid of self-organizing nanorobots consisting of catoms and associated system unit", 2011.
  51. Cuschieri, A. (2005). "Laparoscopic surgery: current status, issues and future developments". Surgeon 3 (3): 125–138. doi:10.1016/S1479-666X(05)80032-0.
  52. Roco, M. C. (2003). "Nanotechnology: convergence with modern biology and medicine". Current Opinion in Biotechnology 14 (3): 337–346. doi:10.1016/S0958-1669(03)00068-5. PMID 12849790.
  53. Scheufele, D. A.; Lewenstein, B. V. (2005). "The Public and Nanotechnology: How Citizens Make Sense of Emerging Technologies". Journal of Nanoparticle Research 7 (6): 659–667. doi:10.1007/s11051-005-7526-2.
  54. Smith, D. M.; Goldstein, D. S.; Heideman, J. (2007). "Reverse Mergers and Nanotechnology". Nanotechnology Law & Business 4 (3).
  55. Morrison, S. (2008). "The Unmanned Voyage: An Examination of Nanorobotic Liability" (PDF). Albany Law Journal of Science & Technology 18 (229).
  56. Craig Tyler, Patent Pirates Search For Texas Treasure, Texas Lawyer, September 20, 2004
  57. Jaffe, A. B.; Lerner, J. (2004). Innovation and Its Discontents: How Our Broken Patent System is Endangering Innovation and Progress, and What to Do About It. ISBN 0-691-11725-X.
  58. Gilbert, R. J.; Newbery, D. M. G. (June 1982). "Preemptive Patenting and the Persistence of Monopoly". American Economic Review 72 (3): 514–526. JSTOR 1831552.
  59. 1 2 Nano Robot by 3D Printing (Seoul National University, Korea).wmv, 2012-01-29, retrieved 2015-12-04
  60. "Nanotechnology and 3D-printing". www.nanowerk.com. Retrieved 2015-12-04.
  61. Nanotechnology in Cancer. nano.cancer.gov
  62. Zyga, Lisa (December 5, 2007) "Virtual 3D nanorobots could lead to real cancer-fighting technology". physorg.com.
  63. Lavan, D. A.; McGuire, T.; Langer, R. (2003). "Small-scale systems for in vivo drug delivery". Nature Biotechnology 21 (10): 1184–91. doi:10.1038/nbt876. PMID 14520404.
  64. "(Emerging Technologies) Software Provides Peek into the Body—and the Future (MPMN archive, March 08)". nanorobotdesign.com.
  65. Leary, S. P.; Liu, C. Y.; Apuzzo, M. L. J. (2006). "Toward the Emergence of Nanoneurosurgery: Part III???Nanomedicine: Targeted Nanotherapy, Nanosurgery, and Progress Toward the Realization of Nanoneurosurgery". Neurosurgery 58 (6): 1009–1026. doi:10.1227/01.NEU.0000217016.79256.16. PMID 16723880.
  66. Tiny robot useful for surgery
  67. Shanthi, Vadali; Sravani Musunuri (13 November 2007). "Prospects for Medical Robots". AZoNano. doi:10.2240/azojono0119.
  68. Melki, Benjamin (January 31, 2007) Nanorobotics for Diabetes. nanovip.com
  69. Donnelly, R. (2007). "Wellness engineering and health management: A video interview with Harold H. Szu". SPIE Newsroom. doi:10.1117/2.3200708.0002.
  70. 1 2 Bhowmik, Debjit (2009). "Role of Nanotechnology in novel Drug Delivery system" (PDF). Journal of Pharmaceutical Science and Technology 1 (1): 20–35.
  71. Bullis, Kevin (April 29, 2008). "Nano RNA Delivery." MIT Technology Review.
  72. Gao, W.; Wang, J. (2014). "Synthetic micro/nanomotors in drug delivery". Nanoscale 6 (18): 10486–94. Bibcode:2014Nanos...610486G. doi:10.1039/C4NR03124E. PMID 25096021.
  73. Gao, W.; Dong, R.; Thamphiwatana, S.; Li, J.; Gao, W.; Zhang, L.; Wang, J. (2015). "Artificial Micromotors in the Mouse's Stomach: A Step towardin Vivo Use of Synthetic Motors". ACS Nano 9 (1): 117–23. doi:10.1021/nn507097k. PMC 4310033. PMID 25549040.
  74. Vartholomeos, P.; Fruchard, M.; Ferreira, A.; Mavroidis, C. (2011). "MRI-Guided Nanorobotic Systems for Therapeutic and Diagnostic Applications". Annu Rev Biomed Eng 13: 157–84. doi:10.1146/annurev-bioeng-071910-124724.
  75. 1 2 Casal, Arancha et al. (2004) "Nanorobots As Cellular Assistants in Inflammatory Responses". nanorobotdesign.com
  76. C. Janeway (ed.) (2001) ImmunoBiology, the Immune System in Health and Disease. Garland Pub; 5th ed. ISBN 0-8153-3642-X.
  77. FDA (2011) Considering Whether an FDA-Regulated Product Involves the Application of Nanotechnology, Guidance for Industry, Draft Guidance.
  78. 1 2 Smith, RR; Lodder, RA (2013). "When does a Nanotechnology Device Become a Drug? Size Versus Smarts". J Dev Drugs 2: e121. doi:10.4172/jdd.1000e121 (inactive 2015-03-08).

Further reading

External links

This article is issued from Wikipedia - version of the Monday, May 02, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.