New South Wales Z12 class locomotive

New South Wales Z12 class

Class Z12 (former Class C.79) Locomotive
Type and origin
Power type Steam
Builder Beyer, Peacock & Co. (34)
Dübs & Co. (26)
Atlas Engineering Works (8)
Serial number BP 1620–1637, 1675–1676, 2060–2063
Build date 1877–1882
Total produced 68
Specifications
Configuration 4-4-0
UIC class 2'Bn
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver diameter 5 ft 6 in (1.676 m)
Adhesive weight 57,000–62,000 lb (25,900–28,100 kg)
Loco weight 84,000–95,000 lb (38,100–43,100 kg)
Firebox:
 • Firegrate area		 15 sq ft (1.4 m2)
Boiler pressure 130 psi (0.9 MPa) as built;
140 psi (1.0 MPa) later
Heating surface 1,070–1,120 sq ft (99–104 m2)
Superheater None
Cylinders Two, outside
Cylinder size 18 in × 24 in (457 mm × 610 mm)
Train brakes Air
Performance figures
Tractive effort 13,019–14,020 lbf (57.9–62.4 kN)
Career
Operators New South Wales Government Railways
Class C79 and C80 (Z12 from 1924)
Numbers 79-92, 118-126, 143-157, 165-182, 27N-30N, 37N-39N, 47N-51N
(1201-1248 from 1924)
Disposition 20 rebuilt to Z13 class, 45 scrapped, 3 preserved

The Z12 class was a class of 4-4-0 steam locomotives built for and operated by the New South Wales Government Railways of Australia.

History

The Z12 Class (formerly C79 and C80 class) was the first class of locomotive on the New South Wales Government Railways to be built in relatively large numbers. They hauled all express passenger and mail trains for some 20 years.

The design derives from the Metropolitan Railway A Class 4-4-0T condensing steam locomotives built for the Metropolitan Railway by Beyer Peacock in 1864. The design of these locomotives was attributed to the Metropolitan Engineer John Fowler, but the design was a development of a locomotive Beyers had built for the Spanish Tudela & Bilbao Railway, Fowler only specifying the driving wheel diameter, axle weight and the ability to navigate sharp curves.[1]

A total of 68 were built. The first batch of 30 were built by Beyer, Peacock and Company and placed in service as the 79 class between 1877 and 1879. They were the first locomotives to be imported with Westinghouse continuous air-brakes already fitted. The second batch of 26 came from Dübs and Company. These arrived between 1880 and 1881. A further four followed from Beyer, Peacock in 1881. To assist local industry, a contract for eight was awarded to the Atlas Engineering Works situated in Sydney's Haymarket and delivered in 1881–1882.[2]

Their numbers were thinned from 1895 when No. 88 was converted to a 4-4-2T tank engine for Sydney suburban service with a further 19 following by 1902. These Tank Engines were reclassified the C79 class. The remaining engines became the C80 class.

The arrival of newer locomotives such as the D255 (later Z15), D261 (later Z16), O446 (later Z23) and P6 (later C32) classes saw them relegated to hauling secondary and later branch line services radiating out of Dubbo, Werris Creek, Narrabri and Moree, where some were equipped with cowcatchers for operation on unfenced lines. In an attempt to prevent cinders blocking the lower boiler tubes between cleanings in December 1956 an extended smokebox was fitted to 1219 with 1243 similarly modified in the 1960s.[2][3][4]

In 1924 the class was renumbered becoming the Z12 class. The Z was an ominous sign however, denoting that the class was regarded as obsolete, and the conversion of 77 C30 class suburban tank engines (made redundant by electrification) into C30T class 4-6-0 branchline engines saw withdrawals begin with 23 taken out of service between 1928 and 1933. Many of the others survived into the 1950s hauling branch line services.[4]

Demise and Preservation

The first two withdrawals occurred in 1957, a further four followed in 1963.

In 1955 for the centenary of rail operations in New South Wales, 1243 was restored to its original livery. It was joined by 1210 in December 1959 and together these hauled the Vintage Train across the state.[3][4]

In January 1962 the pair hauled a special service to Canberra where 1210 and placed on display outside Canberra railway station. Having hauled the first train into the nation's capital in May 1914, 1210 had historical significance for Canberra.[3][4]

Preserved Z12 Class Locomotives
No.PreservedOrganisationLocationStatusRef
1210 Transferred 1962 ARHS ACT DivisionCanberra Railway Museumoperational from 1988

[5]

1219 Transferred 1975 New South Wales Rail Transport MuseumBroadmeadow Locomotive Depotstored

[6]

1243 Set aside 1958 Powerhouse MuseumPyrmontstatic display,operational

[7]

Gallery

See also

References

  1. ↑ Goudie, Frank (1990). Metropolitan Steam Locomotives. Capital Transport. ISBN 9781854141187.
  2. 1 2 Preston, Ron G (1984). Tender into Tank. Sydney: New South Wales Rail Transport Museum. pp. 11–57. ISBN 0 909862 18 4.
  3. 1 2 3 Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society, NSW Division. pp. 41–45. ISBN 0 909650 27 6.
  4. 1 2 3 4 Stokes, HJW (1984). Railways of the Canberra and Monaro Districts. Canberra: Australian Railway Historical Society. p. 54.
  5. ↑ Locomotive, steam 1210 ACT Heritage Council
  6. ↑ Locomotive, steam 1219 Department of Heritage & Environment
  7. ↑ Powerhouse Museum collection - Steam Locomotive No. 1243
Wikimedia Commons has media related to New South Wales Z12 class locomotives.

Further reading

This article is issued from Wikipedia - version of the Monday, March 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.