Sydney Trains fleet

The Sydney Trains fleet serves the metropolitan lines within Sydney, Australia. All of the rolling stock are double-deck electric multiple units and operate mainly as eight carriage sets.

Train sets

S set (1972–1980)

S set
Main article: Sydney Trains S set

S sets were manufactured by Comeng and A Goninan & Co. They were Sydney's first stainless steel double deck carriages. Two thirds of the fleet have been replaced by Waratahs; however, service expansion will not allow all S sets to be replaced by these trains. The remaining S sets will be replaced by H sets from NSW TrainLink when new Intercity trains are introduced (expected 2019) to replace V sets and allowing some H sets to be reallocated to Sydney Trains suburban services. In June 2014, when the final A set was delivered, the government announced all timetabled services would be airconditioned as S sets were removed from timetabled services and allowing them to operate as standbys. However, a few of the trains operate on all Sector 2 lines.[1] S sets are the only passenger trains still in service in NSW which are not air conditioned.

S Sets currently run on

K set (1981–1985)

K set
Main article: Sydney Trains K set

K sets were manufactured by A Goninan & Co and were Sydney's first air-conditioned suburban trains. The first eight carriages built were built with air-conditioning, the remainder of the first order were built with forced-air ventilation, and retrofitted with air-conditioning in 2000. The second order were built with air-conditioning.

K Sets run on

C set (1986)

C set
Main article: Sydney Trains C set

C sets were manufactured by A Goninan & Co. They were introduced in 1986 due to a delay in the design and introduction of the Tangara trains. They are distinguished by a moulded fiberglass front. They are also distinguished by the different sound of their brakes. They were the first trains to introduce the unpopular fixed seating. There are 14 C sets (C1-C14) The order was for 56 cars: Power cars - C3581-C3608 Trailer cars - T4247-T4274

They first set entered service in July 1986 operating out of Mortdale Maintenance Depot some were delivered to Hornsby Maintenance Depot, but by December 1988 all were operating out of Punchbowl Maintenance Depot as sets K40-K51

C sets run

On 23 July 2014, an 8 car C set (C1 with C12) ran on the T4 Eastern Suburbs & Illawarra Line as a replacement for a Tangara.

T set (Tangara) (1988–1995)

T set
Main article: Sydney Trains T set

Tangaras (T sets) are the third generation of electric rollingstock on the suburban network and were manufactured by A Goninan & Co. They feature a distinctive sloped appearance at the cab ends and run in 4 or 8 car configuration. They were introduced between 1988 and 1994, replacing the last of the first generation single deck electrics which had operated since the 1920s.

The last 80 carriages were built as G sets in 1994/95. These ran on shorter interurban services to Springwood, Port Kembla and Wyong. The G sets had baggage storage in each carriage, reversible seats, a toilet and a selective door opening capability for use with shorter platforms in outer suburban areas. These trains also operated on suburban runs, especially outside of peak hours. Following the introduction of the H sets (OSCARs), the G Sets were converted into purely suburban trains and reclassified as T Sets. The toilets were removed during the conversion process but many of the other unique features remain. The G sets target plates also changed

T Sets currently run on

M set (Millennium) (2002–2005)

M set
Main article: Sydney Trains M set

Millennium trains (M sets) were introduced between 2002 and 2005, constituting the fourth generation of suburban rollingstock. These were the first suburban trains in Sydney fitted with a multiphase alternating current traction system. They replaced the Tulloch trailers which the S sets ran with.

M sets run on

H Set (OSCar) 2006-2012

H Set
Main article: NSW TrainLink H set

OSCAR H sets were introduced to in 2006-12. The H sets are shared with NSW TrainLink. They are examples of fourth generation trains.

H Sets run on

A set (Waratah) (2011–2014)

A set
Main article: Sydney Trains A set

Waratah trains are the newest rolling stock in the fleet. Based on the M Set, the design incorporates a number of advancements including 'smart' air-conditioning, updated DVAs, extensive use of LED lighting, internal and external closed-circuit television cameras, and a redesigned vestibule area with a wider entrance area and increased priority seating. Waratahs are also the first to consist of an indivisible eight-car configuration. The trains are manufactured in China by the Changchun Railway Vehicles, with internal fitting-out performed by Downer Rail at Cardiff Locomotive Workshops. The first Waratah train entered service on 1 July 2011 with 78 sets completed in June 2014. They replaced the original of the first generation 6-8 car R & S sets which had operated since the 1970s.

A Sets run on

Driverless trains

In October 2014, the State Government announced its intention to purchase new driverless carriages for the Sydney Rapid Transit network, with deliveries and construct to commence in 2019. These 6 car rapid transit trains will be introduced when the Chatswood to Rouse Hill Line opens that year. This will be operated by Sydney Rapid Transit.

Maintenance Depots

Sydney Trains' electric trains are based at maintenance depots. The colour of target plate at the front of each train reveals the train's maintenance depot.

Mortdale Maintenance Depot (Red target plates)

The following trains are maintained at Mortdale Maintenance Depot:

The out stabling and depot points for Sector 1 include Cronulla, Waterfall and Bondi Junction.

Flemington Maintenance Depot (Blue target plates)

The following trains are maintained at Flemington Maintenance Depot:

The out stabling and depot points for Sector 2 include Campbelltown and Liverpool.

Hornsby Maintenance Depot (Black target plates)

The following trains are maintained at Hornsby Maintenance Depot:

K sets and T sets on Sector 3 (North Shore, Northern & Western Line)

The out stabling and depot points for Sector 3 include Penrith, Blacktown, Richmond, North Sydney and Hornsby.

Eveleigh Maintenance Centre (Green target plates)

The following trains are maintained at Eveleigh Maintenance Centre:

Auburn Maintenance Centre

The Auburn Maintenance Centre was built to exclusively maintain the 78 Waratah Trains.

See also

References

External links

This article is issued from Wikipedia - version of the Friday, April 15, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.