South African Class 6F 4-6-0

CGR 6th Class 4-6-0 1900
South African Class 6F 4-6-0

Ex CGR 6th Class, SAR Class 6F
Type and origin
Power type Steam
Designer Cape Government Railways
(H.M. Beatty)
Builder Sharp, Stewart and Company
Serial number 4631–4632
Model CGR 6th Class
Build date 1900
Total produced 2
Specifications
Configuration 4-6-0 (Tenwheeler)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia 28 12 in (724 mm)
Coupled dia 54 in (1,372 mm)
Tender wheels 33 12 in (851 mm)
Wheelbase 47 ft 2 12 in (14,389 mm)
  Engine 20 ft 8 in (6,299 mm)
  Leading 5 ft 6 in (1,676 mm)
  Coupled 11 ft 4 in (3,454 mm)
  Tender 16 ft 1 in (4,902 mm)
  Tender bogie 4 ft 7 in (1,397 mm)
Wheel spacing
(Assymetrical)
1-2: 4 ft 9 in (1,448 mm)
2-3: 6 ft 7 in (2,007 mm)
Length:
  Over couplers 54 ft 6 58 in (16,627 mm)
Height 12 ft 10 in (3,912 mm)
Frame type Bar
Axle load 12 LT 7 cwt (12,550 kg)
  Leading 10 LT 11 cwt (10,720 kg)
  1st coupled 12 LT 7 cwt (12,550 kg)
  2nd coupled 12 LT 6 cwt (12,500 kg)
  3rd coupled 12 LT 7 cwt (12,550 kg)
  Tender bogie Bogie 1: 17 LT 14 cwt (17,980 kg)
Bogie 2: 18 LT 14 cwt (19,000 kg)
Adhesive weight 37 LT (37,590 kg)
Loco weight 47 LT 11 cwt (48,310 kg)
Tender weight 36 LT 8 cwt (36,980 kg)
Loco & tender weight 83 LT 19 cwt (85,300 kg)
Tender type 2-axle bogies
Fuel type Coal
Fuel capacity 6 LT (6.1 t)
Water cap 2,780 imp gal (12,600 l)
Firebox type Round-top
  Firegrate area 18.75 sq ft (1.742 m2)
Boiler:
  Pitch
6 ft 9 in (2,057 mm)
  Diameter 4 ft 7 in (1,397 mm)
  Tube plates 11 ft 2 18 in (3,407 mm)
  Small tubes 182: 2 in (51 mm)
Boiler pressure 180 psi (1,241 kPa)
Safety valve Ramsbottom
Heating surface 1,170 sq ft (109 m2)
  Tubes 1,065 sq ft (98.9 m2)
  Firebox 105 sq ft (9.8 m2)
Cylinders Two
Cylinder size 17 in (432 mm) bore
26 in (660 mm) stroke
Valve gear Stephenson
Couplers Bell link-and-pin
Performance figures
Tractive effort 18,780 lbf (83.5 kN) @ 75%
Career
Operators Cape Government Railways
South African Railways
Class CGR 6th Class, SAR Class 6F
Number in class 2
Numbers CGR 260-261
SAR 604-605
Delivered 1900
First run 1900
Withdrawn 1929

The South African Railways Class 6F 4-6-0 of 1900 is a steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1900, two redesigned 6th Class 4-6-0 steam locomotives were placed in service by the Cape Government Railways. In 1912, when they were assimilated into the South African Railways, they were renumbered and reclassified to Class 6F.[1][2][3]

Manufacturer

The original 6th Class 4-6-0 passenger steam locomotive was designed at the Salt River works of the Cape Government Railways (CGR) in 1893, at the same time as the 7th Class, both according to the specifications of Michael Stephens, then Chief Locomotive Superintendent of the CGR, and under the supervision of H.M. Beatty, then Locomotive Superintendent of the Western System. Whereas the 7th Class was conceived primarily as a goods locomotive, the 6th Class was intended to be its fast passenger service counterpart.[1]

H.M. Beatty

The two 6th Class locomotives which were placed in service by the CGR in 1900, were built by Sharp, Stewart and Company, numbered 260 and 261 and allocated to the Western System. They were equipped with large commodious cabs, which were to become standard in all subsequent designs. They had larger heating surfaces and grate areas than any of the previous 6th Class locomotives, with the boiler pressure increased to 180 pounds per square inch (1,241 kilopascals) and with larger tenders, which rode on bogies. In visual appearance, they differed from all previous 6th Class locomotives, by having higher mounted running boards without coupled wheel fairings. They proved to be good engines and were better steamers.[1]

These engines reflected the decision by Beatty, who had succeeded Michael Stephens as Chief Locomotive Superintendent in 1895, to adopt bar frames for future CGR locomotives. He thereby demonstrated that, while still keeping to the good points of the locomotives he had designed under Stephens' supervision, he was preparing to adopt his own ideas in his future locomotive designs.[1]

Class 6 sub-classes

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways required careful planning and was only implemented with effect from 1 January 1912.[2][4]

When these two locomotives were assimilated into the South African Railways (SAR) in 1912, they were renumbered 604 and 605 and designated Class 6F.[2][5][6]

The rest of the CGR’s 6th Class locomotives, together with 6th Class locomotives which had been inherited from the Oranje-Vrijstaat Gouwerment-Spoorwegen (OVGS) via the Imperial Military Railways (IMR) and the Central South African Railways (CSAR), were grouped into thirteen more sub-classes by the SAR. The 4-6-0 locomotives became SAR Classes 6, 6A to 6E, 6G, 6H and 6J to 6L, the 2-6-2 locomotives became Class 6Y and the 2-6-4 locomotives became Class 6Z.[2][5][6]

Service

The Class 6 series of locomotives were introduced primarily as passenger locomotives, but when the class became displaced by larger and more powerful locomotive classes, it literally became a Jack-of-all-trades which proved itself as one of the most useful and successful locomotive classes ever to be designed at the Salt River shops. It went on to see service in all parts of the country, except in Natal, and was used on all types of traffic.[1]

These two Class 6F locomotives were placed in service on the Cape mainline. Compared to most of the rest of the Class 6 family, they had a relatively short lifespan of less than thirty years, and were withdrawn from service by 1929.[3]

References

  1. 1 2 3 4 5 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 47–48, 56. ISBN 978-0-7153-5382-0.
  2. 1 2 3 4 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 8, 12, 14, 32 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  3. 1 2 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 43. ISBN 0869772112.
  4. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  5. 1 2 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 137–138. ISBN 978-0-7153-5427-8.
  6. 1 2 South African Railways and Harbours Locomotive Diagram Book, 2’0” & 3’6” Gauge Steam Locomotives, 15 August 1941, as amended
Wikimedia Commons has media related to South African Class 6F (4-6-0).
This article is issued from Wikipedia - version of the Sunday, February 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.