South African steam locomotive tenders

Type CZ condensing tender of the Class 25

South African steam locomotive tenders were classified by means of type letters and sometimes numerals, while locomotive specifications included a list of permissible tenders which could be used with each engine class.^[1]^[2]

Railway development

In South Africa, all early mainline railway construction took place working inland from harbours and ports. Construction of these lines began in the years from 1859 to 1887.^[3]^[4]^[5]

Cape Western – The Cape Town-Wellington line in 1859.^[4]
Namaqualand – The Port Nolloth-O'okiep line in 1869.^[5]
Cape Midland – The Port Elizabeth-Uitenhage line in 1872.
Cape Midland – The Swartkops-Alicedale line in 1875.^[3]
Natal – The Durban-Pietermaritzburg line in 1876.^[4]
Cape Eastern – The East London-King William's Town line in 1876.^[3]
Kowie – The Port Alfred-Grahamstown line in 1881.^[4]
Transvaal – The Delagoa Bay-Pretoria line in 1887.^[4]

On most of these lines, the first locomotives were tank engines, which were in most instances acquired specifically for use during line construction. The first revenue-earning locomotives, on the other hand, were often tender engines from the outset, most notably on the three systems of the Cape Government Railways (CGR). At the other end of the spectrum and in spite of their inherent limited coal and water capacities, the Natal Government Railways (NGR) struggled on with tank locomotives in mainline service until 1904, before it finally adopted tender locomotives, while the Nederlandsche-Zuid-Afrikaansche Spoorweg-Maatschappij (NZASM) relied exclusively on tank engines for the full duration of its existence.^[6]^[7]

Early tenders

In 1860, the Cape Town Railway & Dock 0-4-2 of the Cape Town-Wellington Railway was the first tender locomotive type to enter mainline service in South Africa. The first of these came ashore in Cape Town on 20 March of that year. It had a small two-axle tender with a 1,250 imperial gallons (5,680 litres) water capacity.^[8]

Early CGR mainline locomotives were tank-and-tender engines with optional tenders, which were usually only used during longer trips. The first of these was the CGR 2nd Class 2-6-2TT, which entered service on all three systems of the CGR in 1875 and 1876. It also used a two-axle tender, with a 2 long tons (2.0 tonnes) coal and a 900 imperial gallons (4,090 litres) water capacity.^[9]^[10]

The first three-axle tenders appeared in South Africa during the following year, also on the CGR, on the two versions of the CGR 1st Class 2-6-0 by Beyer, Peacock and Kitson respectively. Both entered service in 1876.^[10]^[11]

The first bogie tenders in South Africa were also three-axle vehicles, on the CGR Eastern System's 3rd Class 4-4-0 and 4th Class 4-6-0TT of 1884. Both used the same tender, which had the leading axle mounted in a rigid frame, while the other two axles were mounted in a bogie.^[12]

The first proper bogie tenders to enter service in South Africa, with two two-axle bogies, came with the first batch of the CGR 7th Class 4-8-0 of 1892.^[13]

Tender type classification

The South African Railways (SAR) era began in 1910, upon the amalgamation of the three former Colonial railways, the CGR, NGR and Central South African Railways (CSAR). Since many tender types are interchangeable between different locomotive classes and types, most South African tender steam locomotives could be equipped with a variety of different tender types, with different coal and water capacities. A tender classification system was therefore adopted by the SAR. Tenders were classified by means of type letters and sometimes numerals, while the specifications of individual locomotive classes included a list of permissible tender types which could be used with each class.^[1]^[2]

Tenders of locomotives which were considered obsolete in 1912, when the renumbering of locomotives of the three component railways onto the SAR roster was implemented, were not classified. The type classification is made up of two letters and, when required, a numeral.^[1]^[2]

Type letter codes

First letter

The first letter of the tender type indicates the classes of engines to which it can be coupled.^[1]^[2]^[14]


Locomotives	1st letter	Actual tender type
Class Exp 4	X_	XE1, XF
Class Exp 5	X_	XF2
Class Exp 6	X_	XF2
Class MC	T_	TM
Class MC1	M_	MP1
Class ME	X_	XF
Class MF	X_	XM4, XS
Class MH	M_	MP1
Class MJ	M_	MP1
Class MJ1	L_	LP
Class S	G_	GT
Class S1	J_	JT1
Class S2	M_	MY1
Class 1	S_	SH, SK
Class 1A	T_	TJ, TL
Class 2	S_	SH, SK
Class 2C	T_	TJ, TL
Class 3	T_	TJ, TL, TM
Class 3B	T_	TL, TM
Class 4	X_	XJ
Class 4A	X_	XM
Class 5	X_	XM2
Class 5A	Y_	YE
Class 5B	Y_	YE1
Class 6	Y_	YB
Class 6A	Y_	YC
Class 6B	X_	XC1, XE
Class 6C	Y_	YC
Class 6D	Y_	YC
Class 6E	X_	XC1, XE
Class 6G	W_	WE
Class 6H	X_	XD, XF
Class 6J	X_	XD, XF
Class 6Y	Y_	YE
Class 6Z	Y_	YE
Class 7	Z_	ZA, ZB
Class 7A	Z_	ZC, ZE
Class 7B	Z_	ZC, ZE
Class 7C	Z_	ZC, ZE
Class 7D	Z_	ZC
Class 7E	Z_	ZC
Class 7F	Z_	ZC
Class 8	X_	XD, XE1, XF
Class 8A	X_	XF
Class 8B	X_	XF
Class 8C	X_	XF
Class 8D	X_	XE1, XF
Class 8E	X_	XE1, XF
Class 8F	X_	XE1, XF
Class 8R	W_	WG
Class 8X	W_	WG
Class 8Y	X_	XE1, XF
Class 8Z	X_	XE1, XF
Class 9	X_	XM3
Class 10	X_	XM2, XP1
Class 10A	X_	XM2
Class 10B	X_	XM2
Class 10C	X_	XC, XM2
Class 11	X_	XM2
Class 12	M_	MP1, MR
Class 12A	M_	MP1, MR, MT
Class 12B	M_	MP1, MR
Class 14	M_	MP1
Class 14A	M_	MP1, MR
Class 14B	M_	MP1, MR
Class 14C	L_	LP
Class 15	M_	MP1, MR
Class 15A	M_	MP1, MR
Class 15B	L_	LP
Class 15CA	K_	KT
Class 15CB	K_	KT
Class 15E	J_	JT
Class 15F	J_	JT
Class 15F stoker	E_	ET, EW
Class 16	M_	MP1, MR
Class 16A	M_	MP1, MR
Class 16B	M_	MP1, MR
Class 16C	M_	MP1, MR
Class 16D	K_	KT
Class 16DA	K_	KT
Class 16E	J_	JT
Class 18	H_	HT
Class 19	M_	MS
Class 19A	M_	MP
Class 19B	M_	MT
Class 19C	M_	MT
Class 19D	M_	MT, MX
Class 20	M_	MP1
Class 21	F_	FT
Class 23	E_	EW
Class 24	M_	MY
Class 25	C_	CZ
Class 25NC	E_	EW1, EW2
Class 26	E_	EW1

Second letter

The second letter of the tender type, or letter and numeral, indicate the tender's water capacity.^[1]^[2]^[14]


Letter	Water capacity
A	2,220 imperial gallons (10,100 litres)
B	2,370 imperial gallons (10,800 litres)
C	2,590–2,600 imperial gallons (11,800–11,800 litres)
C1	2,590–2,600 imperial gallons (11,800–11,800 litres)
D	2,730–2,780 imperial gallons (12,400–12,600 litres)
E	2,800–2,855 imperial gallons (12,700–13,000 litres)
E1	2,800–2,855 imperial gallons (12,700–13,000 litres)
F	3,000 imperial gallons (13,600 litres)
F1	3,000 imperial gallons (13,600 litres)
F2	3,000 imperial gallons (13,600 litres)
G	3,080 imperial gallons (14,000 litres)
H	3,225 imperial gallons (14,700 litres)
J	3,500 imperial gallons (15,900 litres)
K	3,675 imperial gallons (16,700 litres)
L	3,900 imperial gallons (17,700 litres)
M	4,000 imperial gallons (18,200 litres)
M2	4,000 imperial gallons (18,200 litres)
M3	4,000 imperial gallons (18,200 litres)
M4	4,000 imperial gallons (18,200 litres)
P	4,250 imperial gallons (19,300 litres)
P1	4,250 imperial gallons (19,300 litres)
R	4,600 imperial gallons (20,900 litres)
S	5,000 imperial gallons (22,700 litres)
T	5,587–6,000 imperial gallons (25,400–27,300 litres)
T1	6,000 imperial gallons (27,300 litres)
V	7,250–7,500 imperial gallons (33,000–34,100 litres)
W	9,200–10,000 imperial gallons (41,800–45,500 litres)
W1	10,500 imperial gallons (47,700 litres)
W2	11,200 imperial gallons (50,900 litres)
X	6,000 imperial gallons (27,300 litres)
Y	4,500 imperial gallons (20,500 litres)
Y1	4,200 imperial gallons (19,100 litres)
Z	5,000 imperial gallons (22,700 litres)

A digit, when added after the letter code, indicates differences between similar tender types, such as wheelbase or coal bunker capacity.^[2]

Permissible tenders

Tender types other than those specified on each locomotive diagram, were not allowed to be coupled to the engines concerned without the approval of the Chief Civil Engineer. Even in respect of some permissible tenders, it was sometimes necessary to make slight structural alterations before the substitution of a tender with the same initial letter designation could be effected.^[1]^[2]

Any alterations to pipes between the engine and tender, if necessary to suit the class of engine concerned, were to be done on the tender only.^[1]^[2]
Fallplates between engines and tenders were to be of sufficient length to obviate the plate falling between the buffer beams in the event of drawbar failure, and emergency chains or links had to be adjusted in this regard, where necessary.^[1]^[2]
Where necessary, fallplate hinges were to be attached to the engine.^[1]^[2]
Special attention had to be paid to drawbar clearance in the drawbar pockets. Where clearance was insufficient, the buffer beam could be cut away within reason, and where clearance was excessive, a suitable packing washer could be inserted under the engine end of the drawbar, while taking care that there was ample clearance between the drawbar and the top of the opening in the tender.^[1]^[2]
Any difficulty experienced in coupling any combination of engine and tender, had to be reported to the office of the Chief Mechanical Engineer.^[1]^[2]

Tenders which had been altered to suit engines fitted with rigid platforms, had to be reserved for such engines only, unless instructed otherwise by the office of the Chief Mechanical Engineer.^[1]^[2]

Reclassification

Several tender types were reclassified, for various reasons.

From Type CZ to Type EW2, condensing equipment replaced by a D-shaped water tank.^[1]^[2]^[14]
From Type ET to Type ET1, bunker enlarged to 16 long tons (16.3 tonnes) coal capacity.^[1]^[2]
From Type MP1 to Type MR, alteration to the existing water tank.^[1]^[2]
From Type MP1 to Type XP1, alteration to the intermediate and buffing gear.^[1]^[2]
From Type MT to Type MT1, bunker enlarged to 13 long tons (13.2 tonnes) coal capacity.^[1]^[2]
From Type MT to Type MT2, bunker enlarged to 14 long tons (14.2 tonnes) coal capacity.^[1]^[2]
From Type SH to Type SK, rebuilt with a new water tank.^[1]^[2]
From Type TJ to Type TL, rebuilt with a new water tank.^[1]^[2]
From Type TM to Type TL, rebuilt with a new water tank.^[1]^[2]
From Type TM to Type XM1, alteration to the intermediate and buffing gear.^[1]^[2]
From Type XC1 to Type XE, rebuilt with a new water tank.^[1]^[2]
From Type XD to Type XF, rebuilt with a new water tank.^[2]
From Type XE1 to Type XF, rebuilt with a new water tank.^[1]^[2]
From Type ZC to Type ZE, rebuilt with a new water tank.^[1]^[2]

References

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 41.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41-42.
1 2 3 Statement Showing, in Chronological Order, the Date of Opening and the Mileage of Each Section of Railway, Statement No. 19, p. 181, ref. no. 200954-13
1 2 3 4 5 The South African Railways – Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978.
1 2 Bagshawe, Peter (2012). Locomotives of the Namaqualand Railway and Copper Mines (1st ed.). Stenvalls. ISBN 978-91-7266-179-0.
↑ Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter I - The Period of the 4 ft. 8½ in. Gauge. South African Railways and Harbours Magazine, June 1943. pp. 437-440.
↑ Espitalier, T.J.; Day, W.A.J. (1944). The Locomotive in South Africa - A Brief History of Railway Development. Chapter III - Natal Government Railways (Continued). South African Railways and Harbours Magazine, July 1944. pp. 504-505.
↑ Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 13, 15–16, 23. ISBN 978-0-7153-5382-0.
↑ Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 23–25. ISBN 978-0-7153-5382-0.
1 2 Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Adoption of the 3 ft. 6 in. Gauge on the Cape Government Railways. South African Railways and Harbours Magazine, July 1943. pp. 515-518.
↑ Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways (Continued). South African Railways and Harbours Magazine, September 1943. pp. 657-659.
↑ Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways (Continued). South African Railways and Harbours Magazine, December 1943. pp. 883-886.
↑ Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 41–44, 83. ISBN 978-0-7153-5382-0.
1 2 3 Sabatini, Richard (2006). South African Locomotive Tender Classification, Compatibility & Allocation (1st ed.) Richard Sabatini, Kimberley, January 2006. pp. 38-47

South African steam locomotive tenders

Cape gauge	Type LP Type MP1 Type MR Type SH Type SK Type TJ Type TL Type TM Type WE Type WG Type XC Type XC1 Type XD Type XE Type XE1 Type XF Type XF2 Type XJ Type XM Type XM1 Type XM2 Type XM3 Type XM4 Type XP1 Type XS Type YB Type YC Type YE Type YE1 Type ZA Type ZB Type ZC Type ZE

List of South African locomotive classes South African locomotive history

Locomotives of South Africa

Steam

7' ¼" gauge	East London Harbour 0-4-0 Table Bay Harbour 0-4-0ST Table Bay Harbour 0-4-0T Table Bay Harbour 0-4-0WT

4' 8½" gauge	Cape 0-4-0T Blackie Cape 0-4-2 Cape 2-4-0T CGR 0-4-0ST Aid Natal 0-4-0ST Durban Natal 0-4-0WT Natal Natal 4-4-0T Perseverance

3' 6" gauge Tank engines	CGR 0-4-0ST 1873 CGR 0-4-0ST 1874 CGR 0-4-0ST 1881 Coffee Pot CGR 0-6-0ST 1902 CGR 0-6-0T 1876 Back-to-Back CGR 2-6-0ST 1900 CGR 2-6-0ST 1902 CGR 1st Class 0-4-0ST 1875 CGR 1st Class 0-4-0ST 1876 CGR 1st Class 2-6-0ST 1876 CGR 1st Class 4-4-0T 1875 CGR 2nd Class 4-4-0T 1882 CGR 3rd Class 2-6-0T CGR Railmotor CSAR Class C CSAR Class E CSAR Rack CSAR Railmotor DSWA Eight-Coupled Tank 2-8-0T Durban's Congella Durban's Edward Innes Durban's John Milne Durban's Sir Albert Port Elizabeth Harbour 0-4-0ST Kowie Railway 0-6-0T Kowie Railway 4-4-0T Metropolitan & Suburban 4-6-2T NGR 2-6-0T Durban & Pietermaritzburg NGR Class I 2-6-2T NGR Class K 0-4-0ST NGR Class K 0-6-0ST NGR Class K 2-6-0T NZASM 10 Tonner NZASM 13 Tonner NZASM 14 Tonner NZASM 18 Tonner NZASM 19 Tonner NZASM 32 Tonner NZASM 40 Tonner PPR 26 Tonner PPR 35 Tonner Portuguese SAR 0-4-0ST 1903 SAR 0-4-0T no. 69 SAR Class A SAR Class B SAR Class C SAR Class C1 SAR Class C2 SAR Class D SAR Class E SAR Class F SAR Class G SAR Class H SAR Class H1 SAR Class H2 SAR Class J SAR Class K SAR Clayton

3' 6" gauge Tender engines	CGR 1st Class 2-6-0 1876 Beyer, Peacock CGR 1st Class 2-6-0 1876 Kitson CGR 1st Class 2-6-0 1879 CGR 1st Class 2-6-0 1891 CGR 1st Class 4-4-0 1879 CGR 1st Class 4-4-0TT 1881 CGR 2nd Class 2-6-2TT 1875 CGR 3rd Class 4-4-0 1883 CGR 3rd Class 4-4-0 1884 CGR 3rd Class 4-4-0 1889 CGR 3rd Class 4-4-0 1898 CGR 3rd Class 4-4-0 1901 CGR 3rd Class 4-4-0 1903 CGR 4th Class 4-4-2 CGR 4th Class 4-6-0TT 1880 CGR 4th Class 4-6-0TT 1882 CGR 4th Class 4-6-0TT Joy 1882 CGR 4th Class 4-6-0TT 1884 CGR 5th Class 4-6-0 1890 CGR 5th Class 4-6-0 1891 DSWA Eight-Coupled Tender 2-8-0 NGR Havelock NGR Class I SAR Class Exp 1 SAR Class Exp 2 SAR Class Exp 3 SAR Class Exp 4 SAR Class Exp 5 SAR Class Exp 6 SAR Class S SAR Class S1 SAR Class S2 SAR Class 1 SAR Class 1A SAR Class 1B SAR Class 2 SAR Class 2C SAR Class 3 SAR Class 3A SAR Class 3B SAR Class 4 SAR Class 4A SAR Class 5 SAR Class 5A SAR Class 5B SAR Class 6 SAR Class 6A SAR Class 6B SAR Class 6C SAR Class 6D SAR Class 6E SAR Class 6F SAR Class 6G SAR Class 6H SAR Class 6J SAR Class 6K SAR Class 6L SAR Class 6Y SAR Class 6Z SAR Class 7 SAR Class 7A SAR Class 7B SAR Class 7C SAR Class 7D SAR Class 7E SAR Class 7F SAR Class 8 SAR Class 8A SAR Class 8B SAR Class 8C SAR Class 8D SAR Class 8E SAR Class 8F SAR Class 8R SAR Class 8X SAR Class 8Y SAR Class 8Z SAR Class 9 SAR Class 10 SAR Class 10A SAR Class 10B SAR Class 10C SAR Class 10D SAR Class 11 SAR Class 12 SAR Class 12A SAR Class 12B SAR Class 13 SAR Class 14 SAR Class 14A SAR Class 14B SAR Class 14C 1st SAR Class 14C 2nd SAR Class 14C 3rd SAR Class 14C 4th SAR Class 15 SAR Class 15A SAR Class 15B SAR Class 15C SAR Class 15CA SAR Class 15E SAR Class 15F SAR Class 16 SAR Class 16A SAR Class 16B SAR Class 16C SAR Class 16D SAR Class 16DA SAR Class 16E SAR Class 17 SAR Class 18 SAR Class 19 SAR Class 19A SAR Class 19B SAR Class 19C SAR Class 19D SAR Class 20 SAR Class 21 SAR Class 23 SAR Class 24 SAR Class 25 SAR Class 25NC SAR Class 26 SAR Katanga

3' 6" gauge Articulated engines	CGR Fairlie CGR Kitson-Meyer SAR Class FC SAR Class FD SAR Class GA SAR Class GB SAR Class GC SAR Class GCA SAR Class GD SAR Class GDA SAR Class GE SAR Class GEA SAR Class GF SAR Class GG SAR Class GH SAR Class GK SAR Class GL SAR Class GM SAR Class GMA SAR Class GO SAR Class HF SAR Class KM SAR Class MA SAR Class MB SAR Class MC SAR Class MC1 SAR Class MD SAR Class ME SAR Class MF SAR Class MG SAR Class MH SAR Class MJ SAR Class MJ1 SAR Class U

2' 6" gauge	Cape Copper 0-6-0T 1871 Cape Copper Britannia Cape Copper Caledonia Cape Copper Clara Cape Copper Condenser Cape Copper Scotia Namaqua Copper Pioneer

2' & 600mm gauges	ACR Class NG-G16A CGR NG 0-6-0T CGR NG 4-6-2T CGR Type A 2-6-4T CGR Type C 0-4-0T DSWA Class Ha DSWA Class Hb DSWA Class Hc DSWA Class Hd DSWA Jung DSWA Zwillinge NGR Class N 4-6-2T SAR Dutton SAR NG 0-4-0T 1899 SAR Class NG1 SAR Class NG2 SAR Class NG3 SAR Class NG4 SAR Class NG5 SAR Class NG6 SAR Class NG7 SAR Class NG8 SAR Class NG9 SAR Class NG10 SAR Class NG-G11 SAR Class NG-G12 SAR Class NG-G13 SAR Class NG-G14 SAR Class NG15 SAR Class NG-G16

Electric

Amcoal Class E38

Gas-electric

Gas-electric

Diesel

3' 6" gauge Diesel-electric	PRASA Class Afro 4000 SAR Class DS SAR Class DS1 SAR Class 31-000 SAR Class 32-000 SAR Class 32-200 SAR Class 33-000 SAR Class 33-200 SAR Class 33-400 SAR Class 34-000 SAR Class 34-200 SAR Class 34-400 SAR Class 34-500 SAR Class 34-600 SAR Class 34-800 SAR Class 34-900 SAR Class 35-000 SAR Class 35-200 SAR Class 35-400 SAR Class 35-600 SAR Class 36-000 SAR Class 36-200 SAR Class 37-000 Spoornet Class 39-000 TFR Class 35-800 TFR Class 39-200 TFR Class 43-000 TFR Class 44-000

2' gauge Diesel-electric	SAR Class 91-000

3' 6" gauge Diesel-hydraulic	SAR Class 61-000

3' 6" gauge Electro-diesel	Spoornet Class 38-000

This article is issued from Wikipedia - version of the Friday, April 08, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.