South African type ZA tender

South African type ZA tender

Type ZA tender on CGR 7th Class of 1892
Type and origin
Locomotive CGR 7th Class of 1892
Designer Cape Government Railways
(H.M. Beatty)
Builder Dübs and Company
In service 1892
Specifications
Configuration 2-axle bogies
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Length 21 ft 9 18 in (6,633 mm)
Wheel dia. 33 12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase 14 ft 7 in (4,445 mm)
  Bogie 4 ft 7 in (1,397 mm)
Fuel type Coal
Fuel cap. 3 LT 10 cwt (3.6 t)
Water cap. 2,220 imp gal (10,100 l)
Stoking Manual
Couplers Drawbar & Bell link-and-pin
Career
Operators Cape Government Railways
Imperial Military Railways
South African Railways
Numbers SAR 950-953, 968-969

The South African type ZA tender was a steam locomotive tender from the pre-Union era in the Cape of Good Hope.

The Type ZA tender entered service in 1892, as tenders to the first batch of 7th Class 4-8-0 Mastodon type steam locomotives to be acquired by the Cape Government Railways. These locomotives were designated Class 7 on the South African Railways in 1912.[1][2][3]

Manufacturer

The Types ZA and ZB tenders were both introduced in 1892 as tenders to the original Cape Government Railways (CGR) 7th Class 4-8-0 Mastodon type locomotive, which was built in two batches. Six engines were built by Dübs and Company in 1892, and 32 by Neilson and Company in 1892 and 1893. Since a Neilson works picture shows one of the Neilson-built batch of locomotives with the larger-capacity three-axle Type ZB tender, it is likely that the smaller-capacity Type ZA bogie tenders were delivered with the first batch of six 7th Class locomotives, built by Dübs.[2][3]

The locomotive and tender were designed at the Salt River works in Cape Town under the supervision of Western System Locomotive Superintendent H.M. Beatty.[1][2][3]

The Type ZA entered service as tenders to these locomotives, all of which were initially placed in service on the Midland System of the CGR, but were later distributed between the Midland and Eastern Systems. These engines would be designated Class 7 on the South African Railways (SAR) in 1912.[1][2][3]

Classification

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR and these tenders were designated Type ZA.[3][4]

Type ZA tender

In the SAR years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the tender number and tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.[3][4]

Only Class 7 locomotives were delivered new with Type ZA tenders. The six Dübs-built tenders should have been renumbered in the SAR number range from 950 to 953 in respect of the four ex-Midland System engines, and 968 and 969 in respect of the two ex-Eastern System engines. Having already been in service for twenty years by then, and given the interchangeability of tenders between engines, it is possible, but not confirmed, that tenders were numbered for the engines they were attached to at the time.[4]

Letter codes

The first letter of the tender type indicates the classes of engines to which it can be coupled. The "Z_" tenders could be used with the following locomotive classes:[3]

The second letter indicates the tender's water capacity. The "_A" tenders had a capacity of 2,220 imperial gallons (10,100 litres).[3]

A number, when added after the letter code, indicates differences between similar tender types, such as wheelbase or coal bunker capacity.[3]

References

  1. 1 2 3 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 40–41, 61. ISBN 978-0-7153-5382-0.
  2. 1 2 3 4 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 41.
  3. 1 2 3 4 5 6 7 8 9 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41.
  4. 1 2 3 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 8, 12, 15, 37 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
This article is issued from Wikipedia - version of the Friday, April 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.