South African type WE tender

South African type WE tender

Type WE tender on CGR 6th Class of 1901 (Schenectady)
Type and origin
Locomotive CGR 6th Class of 1901 (Schenectady)
Designer Cape Government Railways
Schenectady Locomotive Works
Builder Schenectady Locomotive Works
In service 1901
Specifications
Configuration 2-axle bogies
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Length 20 ft 4 1116 in (6,215 mm)
Wheel dia. 33 12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase 14 ft 5 in (4,394 mm)
  Bogie 5 ft (1,524 mm)
Axle load 8 LT 13 cwt (8,789 kg)
  Front bogie 15 LT 16 cwt (16,050 kg)
  Rear bogie 17 LT 6 cwt (17,580 kg)
Weight empty 34,944 lb (15,850 kg)
Weight w/o 33 LT 2 cwt (33,630 kg)
Fuel type Coal
Fuel cap. 5 LT (5.1 t)
Water cap. 2,800 imp gal (12,700 l)
Stoking Manual
Couplers Drawbar & Bell link-and-pin
Career
Operators Cape Government Railways
South African Railways
Numbers SAR 606-613

The South African type WE tender was a steam locomotive tender from the pre-Union era in the Cape of Good Hope.

Type WE tenders entered service in 1901, as tenders to the 6th Class 4-6-0 Tenwheeler type steam locomotives which were acquired by the Cape Government Railways from Schenectady Locomotive Works in that year. These locomotives were designated Class 6G on the South African Railways in 1912.[1][2][3]

Manufacturers

Type WE tenders were built by Schenectady Locomotive Works in 1901.[1][2][3][4]

The Cape Government Railways (CGR) placed eight redesigned 4-6-0 Tenwheeler type steam locomotives in service in 1901, designed and built by the Schenectady Locomotive Works to the specifications of the CGR locomotive department. These locomotives were designated Class 6G on the South African Railways (SAR) in 1912. The Type WE entered service as tenders to these engines.[1][2][3]

Classification

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR and these tenders were designated Type WE.[1][3][5]

In the SAR years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.[3][5]

Only the Schenectady-built Class 6B locomotives were delivered new with Type WE tenders, renumbered in the SAR number range from 606 to 613. The tenders could also be coupled to Classes 8R and 8X locomotives, but the drawbar and safety chains had to be altered to suit the target engine.[2][3][5]

Letter codes

The first letter of the tender type indicates the classes of engines to which it can be coupled. The "W_" tenders could be used with the following locomotive classes:[3]

The second letter indicates the tender's water capacity. The "_E" tenders had a capacity of between 2,800 and 2,855 imperial gallons (12,700 and 13,000 litres).[3]

A number, when added after the letter code, usually indicates differences between similar tender types, such as wheelbase or coal bunker capacity.[3]

References

  1. 1 2 3 4 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 48, 56. ISBN 978-0-7153-5382-0.
  2. 1 2 3 4 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 42.
  3. 1 2 3 4 5 6 7 8 9 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 42.
  4. "Schenectady Ten Wheel Locomotives for Cape Government Railways". Railway and Locomotive Engineering – A Practical Journal of Railway Motive Power and Rolling Stock 13 (3): 131–132. March 1901. Retrieved 23 December 2012.
  5. 1 2 3 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
This article is issued from Wikipedia - version of the Thursday, April 07, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.