South African Class Experimental 4 2-8-2

This article is about one of two different Cape Government Railways locomotive types to be designated "9th Class". For the other CGR 9th Class locomotive, see South African Class Experimental 5 2-8-2.
CGR 9th Class 2-8-2 1903
South African Class Experimental 4 2-8-2

CGR 9th Class no. 806, c. 1911
SAR Class Experimental 4 no. 911
Type and origin
Power type Steam
Designer Cape Government Railways
(H.M. Beatty)
Builder Kitson and Company
Serial number 4195-4196
Model CGR 9th Class
Build date 1903
Total produced 2
Specifications
Configuration 2-8-2 (Mikado)
Driver 3rd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 28 12 in (724 mm)
Coupled dia. 48 in (1,219 mm)
Trailing dia. 33 in (838 mm)
Tender wheels 33 12 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase 50 ft 7 14 in (15,424 mm)
  Engine 26 ft 9 in (8,153 mm)
  Coupled 13 ft 1 in (3,988 mm)
  Tender 14 ft 7 in (4,445 mm)
  Tender bogie 4 ft 7 in (1,397 mm)
Wheel spacing
(Assymetrical)
1-2: 4 ft 7 in (1,397 mm)
2-3: 4 ft 3 in (1,295 mm)
3-4: 4 ft 3 in (1,295 mm)
Length:
  Over couplers 58 ft 5 34 in (17,824 mm)
Height 12 ft 10 in (3,912 mm)
Frame type Bar
Axle load 12 LT 16 cwt (13,010 kg)
  Leading 5 LT 5 cwt (5,334 kg)
  1st coupled 12 LT 6 cwt (12,500 kg)
  2nd coupled 11 LT 16 cwt (11,990 kg)
  3rd coupled 12 LT (12,190 kg)
  4th coupled 12 LT 16 cwt (13,010 kg)
  Trailing 10 LT 4 cwt (10,360 kg)
  Tender axle 9 LT 4 cwt 1 qtr (9,360 kg) av.
Adhesive weight 48 LT 18 cwt (49,680 kg)
Loco weight 64 LT 7 cwt (65,380 kg)
Tender weight 36 LT 18 cwt (37,490 kg)
Total weight 101 LT 5 cwt (102,900 kg)
Tender type XE1 (2-axle bogies)
Fuel type Coal
Fuel capacity 6 LT (6.1 t)
Water cap 2,855 imp gal (12,980 l)
Firebox type Round-top
  Firegrate area 26.75 sq ft (2.485 m2)
Boiler:
  Pitch 7 ft 1 in (2,159 mm)
  Diameter 4 ft 10 34 in (1,492 mm)
  Tube plates 14 ft 10 18 in (4,524 mm)
  Small tubes 159: 2 14 in (57 mm)
Boiler pressure 180 psi (1,241 kPa)
Safety valve Ramsbottom
Heating surface 1,508.3 sq ft (140.13 m2)
  Tubes 1,391 sq ft (129.2 m2)
  Firebox 117.3 sq ft (10.90 m2)
Cylinders Two
Cylinder size 19 in (483 mm) bore
24 in (610 mm) stroke
Valve gear Stephenson
Couplers Bell link-and-pin
Performance figures
Tractive effort 24,370 lbf (108.4 kN) @ 75%
Career
Operators Cape Government Railways
South African Railways
Class CGR 9th Class
SAR Class Experimental 4
Number in class 2
Numbers CGR 805-806, SAR 910-911
Delivered 1903
First run 1903
Withdrawn 1930
The 2nd & 3rd coupled axles had flangeless wheels

The South African Railways Class Experimental 4 2-8-2 of 1903 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1903, the Cape Government Railways placed two 9th Class steam locomotives with a 2-8-2 Mikado type wheel arrangement in service. In 1912, when they were assimilated into the South African Railways, they were renumbered and designated Class Experimental 4.[1][2][3][4]

Manufacturer

The Cape 9th Class locomotive was designed by H.M. Beatty, the Locomotive Superintendent of the Cape Government Railways (CGR) from 1896 to 1910. They were the first South African locomotives to have a 2-8-2 Mikado wheel arrangement and they were built with bar frames, had Stephenson’s Link valve gear and used saturated steam. Two locomotives were delivered by Kitson and Company in 1903, numbered 805 and 806.[1][2][3][4]

Characteristics

H.M. Beatty

The locomotives were delivered with Type XE1 tenders. Their intermediate and driving coupled wheels were flangeless to allow them to cope with tight curves, such as in turnouts.[2][5][6]

With these locomotives, Beatty attempted to combine the best design features and good qualities of his Cape 8th Class 2-8-0 locomotive of 1901 with the improved steaming which was obtained from a wide firegrate. In many respects, they were enlarged versions of the two Cape 6th Class 2-6-2 locomotives which were delivered by Kitson in that same year, with many features in common.[1]

Performance

In comparison with the Cape 8th Class it was found that their operational and maintenance costs were much higher, without any advantage in terms of efficiency. As a result, no more of the type were ordered.[1][2][4]

Service

They were placed in service on the mainline between De Aar and Kimberley.[1][2][4]

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways required careful planning and was only implemented with effect from 1 January 1912.[3][7]

In 1912, the locomotives were reclassified as Class Experimental 4 and renumbered to 910 and 911 on the SAR. They were withdrawn from service and scrapped in 1930.[1][2][3][4][8]

References

  1. 1 2 3 4 5 6 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 68–69. ISBN 978-0-7153-5382-0.
  2. 1 2 3 4 5 6 Espitalier, T.J.; Day, W.A.J. (1944). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways (Continued). South African Railways and Harbours Magazine, March 1944. pp. 169-173.
  3. 1 2 3 4 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 9, 12, 15, 36 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  4. 1 2 3 4 5 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 83. ISBN 0869772112.
  5. South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  6. South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 43.
  7. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  8. Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. p. 140. ISBN 978-0-7153-5427-8.
Wikimedia Commons has media related to South African Class Exp 4 (2-8-2).
This article is issued from Wikipedia - version of the Monday, March 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.